Toshiba R10 - Figure 1-6 Keyboard

4 Replacement Procedures 4.10 Keyboard
5. Remove the following screw and slide the KB SUP PLT ASSY as shown below to
remove.
• M2.5×3C S-THIN screw ×1
6. Disconnect the keyboard flexible cable from the connector CN3230 on the system board
and remove the keyboard.
M2.5x3C S-THIN
Keyboard flexible cable
KB SUP PLT ASSY
CN3230
Keyboard
Figure 4-12 Removing the keyboard (2)
4-24 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)