Toshiba R10 - Hinge

4 Replacement Procedure 4.31 Hinge
4.31 Hinge
Removing the Hinge (BH L ASSY/BH R ASSY)
To remove the hinges, follow the steps below and refer to Figure 4-54.
1. Remove the following screws securing the hinges.
• M2.5×4B S-THIN HEAD ×4 (2 each)
2. Remove the hinges (BH L ASSY/BH R ASSY) from the LCD COVER ASSY.
BH L ASSY
BH R ASSY
M2.5x4B S-THIN HEAD
LCD COVER ASSY
Figure 4-54 Removing the hinge
4-84 [CONFIDENTIAL] TECRA R10 Maintenance Manual (960-708)