4.28 TOUCH PAD/Fingerprint sensor board 4 Replacement Procedure
4. Peel off the TOUCH PAD.
TOUCH PAD
Figure 4-43 Removing the TOUCH PAD/Fingerprint sensor board (2)
5. Turn over the COVER ASSY.
6. Remove TP BTN COV ASSY while releasing latches.
TP BTN COV ASSY
Latch
Figure 4-44 Removing the TOUCH PAD /Fingerprint sensor board (3)
TECRA R10 Maintenance Manual (960-708) [CONFIDENTIAL] 4-71
To Next Page
Loading...
