Need help?Do you have a question about the Toshiba RAS-10SKX and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-10SKX |
| Category | Air Conditioner |
| Language | English |
Technical specifications for the indoor unit including dimensions and performance.
Technical specifications for the outdoor unit including dimensions and performance.
Detailed diagrams and dimensions for the indoor unit assembly.
Detailed diagrams and dimensions for the outdoor unit assembly.
List and specifications of electrical components for the indoor unit.
List and specifications of electrical components for the outdoor unit.
Explanation of the unit's operation when only the fan is active.
Explanation of the unit's cooling mode operation and fan control.
Explanation of the unit's dehumidification mode operation.
Explanation of the unit's automatic mode selection based on temperature.
Details on the temporary auto operation mode.
Explanation of the energy-saving mode and its operation.
Control for preventing freezing in low-temperature cooling operation.
Feature allowing automatic restart after power interruption.
Step-by-step guide to enable the automatic restart feature.
Step-by-step guide to disable the automatic restart feature.
How power failures affect timer operations with auto-restart.
Essential safety guidelines and warnings to follow during installation.
Diagrams showing recommended placement and clearances for units.
Lists of optional and standard parts required for unit installation.
Steps for installing the indoor unit and its components.
Procedures for creating wall openings and mounting the installation plate.
Guidelines for electrical connections and power source requirements.
Detailed instructions for making electrical wiring connections.
Procedures for connecting refrigerant pipes and drain hoses.
Steps for physically mounting the indoor unit onto the installation plate.
Instructions for ensuring proper drainage from the unit.
Placement guidelines and precautions for the outdoor unit.
Detailed steps for connecting the refrigerant piping between units.
Procedure for evacuating air and moisture from the refrigerant lines.
Instructions for connecting the electrical wiring to the outdoor unit.
Miscellaneous checks and procedures after installation.
Method for checking for refrigerant leaks after installation.
Procedure for performing a test run of the air conditioner.
How to enable the auto restart function.
Basic checks to perform before detailed troubleshooting.
Verifying the correct AC voltage supply to the unit.
Checking for proper electrical cable connections between units.
Explains operations that might seem like faults but are normal.
Methods for diagnosing the root cause of operational issues.
Overview of the indoor unit controller's functions and responsibilities.
How to interpret error codes and diagnose faults using display indicators.
Step-by-step diagnostic procedures for common faults.
Diagnostic steps for when the unit does not turn on at all.
Steps to diagnose power issues after PC board replacement.
Diagnostic steps for when the outdoor unit fails to operate.
Diagnostic steps for when only the compressor is not operating.
Diagnostic steps for when only the outdoor fan is not operating.
Diagnostic steps for when only the indoor fan is not operating.
Procedure for diagnosing issues with the remote control and PC board.
Steps and precautions for checking the printed circuit board for defects.
Visual layout of components on the PC board for reference.
Method to modify the auto restart timer operation time.
Steps for replacing parts of the indoor unit assembly.
Procedure for replacing the microcomputer and related components.
Procedures for replacing parts of the outdoor unit assembly.
List of parts and their corresponding location numbers for the indoor unit.
List of parts and their corresponding location numbers for the indoor unit.
List of parts and their corresponding location numbers for the outdoor unit.
To Next Page