Need help?Do you have a question about the Toshiba RAS-13YK-ES and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-13YK-ES |
| Category | Air Conditioner |
| Language | English |
Diagrams and dimensions for indoor unit installation.
Diagrams and dimensions for outdoor unit installation.
Lists electrical components and specifications for the indoor unit.
Lists electrical components and specifications for the outdoor unit.
Details on how the unit operates in fan-only mode.
Explanation of cooling mode operation and control logic.
How to control the louver position and automatic swing in cooling mode.
Description of the dry mode operation and its control.
Explanation of heating mode operation and control logic.
How to control the louver position and automatic swing in heating mode.
Prevents cool air blow during heating by controlling fan speed.
Description of automatic mode selection based on room temperature.
Details on the temporary auto mode function.
Explanation of the energy-saving ECONO mode.
How the system limits current to prevent overload.
Control to prevent overheating during heating operation.
Control to prevent freezing during cooling operation.
Prevents cool air blow during heating by controlling fan speed.
Criteria for initiating the defrost cycle.
Duration and timing of the defrost operation.
Step-by-step guide to enable the auto restart function.
Steps to disable or cancel the auto restart function.
Critical safety warnings and precautions for installation.
Visual guide for installing indoor and outdoor units with piping.
Lists and describes optional parts required for installation.
Lists parts included with the unit for installation.
Guidelines for selecting an appropriate location for the indoor unit.
Procedures for cutting wall holes and mounting the installation plate.
Instructions for performing electrical connections safely and correctly.
Detailed steps for connecting the wiring between units.
Steps for installing refrigerant piping and drain hoses.
Detailed instructions for physically mounting the indoor unit.
Proper installation of drain hoses for water drainage.
Guidelines for selecting an appropriate location for the outdoor unit.
List of tools needed for the installation process.
Procedures for connecting the refrigerant pipes correctly.
Steps for vacuum pumping the refrigerant lines to remove air and moisture.
Final wiring connections for the outdoor unit.
Initial checks to perform before detailed troubleshooting.
Methods for diagnosing the source of common issues.
Functions and responsibilities of the indoor unit's control system.
How to use the remote control for self-diagnosis.
Flowchart for diagnosing power-on issues.
Troubleshooting steps for power issues post-P.C. board replacement.
Flowchart for diagnosing outdoor unit operational failures.
Troubleshooting steps when the compressor fails to operate.
Troubleshooting steps for outdoor fan failures.
Troubleshooting steps for 4-way valve issues during heating.
Troubleshooting steps for indoor fan failures.
Procedures for inspecting and checking the P.C. board.
Diagram showing the layout of components on the P.C. board.
Method to adjust the anti-restart timer duration.
Procedures for replacing parts within the indoor unit.
Steps for replacing the microcomputer and related components.
Procedures for replacing parts within the outdoor unit.
Exploded view and parts list for the indoor unit components.
Second part of the indoor unit exploded view and parts list.
Exploded view and parts list for the outdoor unit.
To Next Page
