Toshiba RAS-18SKV2-E - Remote Controller; Remote Controller and Its Functions; Operation of Remote Controller

– 43 –
9-4. Remote Controller
9-4-1. Remote Controller and Its Functions
1 Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN)
6 Swing louver button (SWING)
7 Set louver button (FIX)
8 On timer button (ON)
9 Off timer button (OFF)
10 Sleep timer button (SLEEP)
11 Setup button (SET)
12 Clear button (CLR)
13 Memory and Preset button (PRESET)
14 One Touch button (ONE-TOUCH)
15 High power button (Hi-POWER)
16 Economy button (ECO)
17 Quiet button (QUIET)
18 Comfort sleep button (COMFORT SLEEP)
9-4-2. Operation of Remote Controller
1. ONE-TOUCH
Push the “ONE-TOUCH” button for fully automated operation that is customised to the typical consumer
preferences in your region of the world. The coutomised settings control temperature air flow strength, air
flow direction and other settings to provide you alternate contact with “ONE-TOUCH” OF THE BUTTON.
If you prefer other settings you can select from the many other operation functions of your TOSHIBA unit
Push
ONE-TOUCH : Start the operaton.
2. AUTOMATIC OPERATION
To automatically select cooling, heating, or fan only operation.
1. Push
MODE : Select A.
2. Push
TEMP
TEMP : Set the desired temperature.
3. COOLING / HEATING / FAN ONLY OPERATION
To automatically select cooling, heating, or fan only operation.
1. Push
MODE : Select Cool , Heat , or Fan only .
2. Push
TEMP
TEMP : Set the desired temperature. Cooling/Heating : Min. 17°C : Max. 30°C,
Fan Only: No temperature indication
3. Push
FAN : Select AUTO, LOW ,
LOW+ , MED , MED+ , or HIGH .
19 Filter reset button (FILTER)
20 Clock Reset button (CLOCK)
21 Check button (CHK)
FILE NO. SVM-11031