– 6 –
FILE NO. SVM-05015
Note : 1
• Capacity is based on the following temperature conditions.
Note : 2
• Charge refrigerant according to the table below.
refrigerant
*2 Need to charge
Over 15m up to 20m (20g/m) Over 15m up to 25m (30g/m)
refrigerant
Temperature
Condition
JIS B8615-1
Cooling Heating
Indoor unit inlet air temperature
(DB) 27°C 20°C
(WB) 19°C 12°C
Outdoor unit inlet air temperature
(DB) 35°C 7°C
(WB) 24°C 6°C
RAS-18UFHP-E4 / RAS-18UAH-E4 RAS-24UFHP-E4 / RAS-24UAH-E4
RAS-18UFP-E4 / RAS-18UA-E4 RAS-24UFP-E4 / RAS-24UA-E4
RAS-18UFPX4 / RAS-18UAX4 RAS-24UFPX4 / RAS-24UAX4
Refrigerant
RAS-18UFP-AR4 / RAS-18UA-AR4 RAS-24UFP-AR4 / RAS-24UA-AR4
RAS-18UFPX4-T2 / RAS-18UAX4-T2
*1 No need to charge
15m or less 15m or less
To Next Page
Loading...
