Toshiba RAS-24NKHP-E - Installation Diagram of Indoor and Outdoor Units

8-2. Installation Diagram of Indoor and Outdoor Units
170 mm
or more
For the rear left and left
piping
Insert the cushion between
the indoor unit and wall,
and lift the indoor unit for
better operation.
Wall
be connected the left, rear
left, rear, right or bottom.
Insulate the refrigerant
pipes separately with
insulation, not together.
6 mm thick heat resisting
polyethylene foam
Left
Rear
left
Right
Rear
Bottom
(Atta
c
h to th
e f
r
on
t panel) (A
ttac
h to
the air filter)
2 Wireless remote control
Bef
ore installing the
wireless remote control
• With the remote control cover
open, load the batteries supplied
correctly, observing their polarity.
2 Wireless remote control
3 Batteries
Cover
8 Pan head wood screw
4 Remote control holder
Do not allow the drain
hose to get slack.
Make sure to run the drain
hose sloped downward.
Cut the piping
hole sloped
slightly
5 Sasa-Zeolite Vitamin C filter
6 Bio
-enzyme & Gingko filter
65 mm or more
170 mm
or more
Hook
1 Installation
plate
Shield
pipe
FILE NO. SVM-05011
FILE NO. SVM-06009
1
0
0
m
m
o
r
m
o
r
e
6
0
0
m
m
o
r
m
o
r
e
600 mm or more
100 mm or more
600 mm or more
Saddle
Vinyl tape
Apply after carrying
out a drainage test.
Extension drain hose
(Not available,
provided by installer)
− 31 −