To Next PageTo Next Page
Need help?Do you have a question about the Toshiba RAS-25J2AVG-ND and is the answer not in the manual?
General| Brand | Toshiba |
|---|---|
| Model | RAS-25J2AVG-ND |
| Category | Air Conditioner |
| Language | English |
Critical safety warnings regarding immediate hazards like electric shock and fire.
Important safety advice to prevent serious injury or damage, including child safety and proper installation.
Precautions to avoid minor injury, damage to the unit, or improper operation, including cleaning and storage.
Explanation of the indicators and symbols shown on the indoor unit's display.
Instructions for initial setup, including filter installation and remote control battery loading.
Guidance on adjusting the vertical and horizontal airflow direction using the remote control.
Identification and explanation of buttons and features on the wireless remote control.
How the unit automatically selects cooling, heating, or fan operation based on conditions.
Instructions for selecting the primary operating modes: Cool, Heat, or Fan Only.
How to use the air conditioner for dehumidification with moderate cooling.
Enables faster cooling or heating by optimizing room temperature and airflow control.
How to activate energy-saving (ECO) and noise-reducing (SILENT) modes for comfort and efficiency.
Setting the ON or OFF timer for automated operation scheduling of the air conditioner.
How to adjust or turn off the display lamps on the indoor unit via the remote.
How to operate the unit without the remote control using the RESET button on the indoor unit.
Information on how the unit automatically restarts in the same mode after a power failure.
Using the self-cleaning feature to prevent indoor unit odor caused by humidity.
How to manually initiate defrosting for the outdoor unit during heating operation.
Essential guidelines for cleaning air filters and performing general care for the unit.
Information on operating conditions, performance characteristics, and normal operating sounds.
Guidance on resolving common problems like unit not operating or low cooling/heating performance.
How to assign specific remote controls to indoor units in multi-unit installations.
