Need help?Do you have a question about the Toshiba RAV-RM2801DTP-E and is the answer not in the manual?
General| Cooling Capacity (kW) | 8.0 |
|---|---|
| Heating Capacity (kW) | 9.0 |
| Power Source | Electric |
| Noise Level (Indoor Unit) | 45 dB |
| Refrigerant | R410A |
Explains critical safety warnings and dangers associated with operation and maintenance.
Lists cooling and heating capacities for different models under specified conditions.
Details electrical properties like power supply, current, and power factor for indoor and outdoor units.
Graphs showing fan speed and static pressure characteristics against airflow for different models.
Illustrates the external dimensions, duct connections, and space requirements for installation.
Shows the detailed wiring schematic for the indoor unit's control and fan circuits.
Depicts the functional blocks and connections within the indoor unit's control system.
Provides a general overview of troubleshooting steps and confirmation points before diagnosing issues.
Outlines the systematic process for diagnosing and resolving unit malfunctions.
Lists various check codes detected by the system and their potential causes for indoor/outdoor units.
Offers step-by-step guidance for diagnosing specific check codes detected by the indoor unit.
Details the procedure for replacing the indoor control P.C. board, including data backup and setting.
Provides steps for removing and installing the Fan IPDU P.C. board, including handling heat sinks.
Explains how to perform a test run operation using wired and wireless remote controllers.
Provides an exploded diagram and a list of parts for the indoor unit with location numbers.
Specifies concentration limits for refrigerants and required room volume based on standards.
To Next Page