Do you have a question about the Toshiba RAV-SM1103UT-E and is the answer not in the manual?
Brand | Toshiba |
---|---|
Model | RAV-SM1103UT-E |
Category | Air Conditioner |
Language | English |
Ensures proper installation by qualified professionals and correct grounding procedures.
Details requirements for disconnecting the appliance from the main power supply.
Advises against dangerous tasks, health risks, and immediate actions for abnormalities.
Emphasizes that only authorized personnel should move or repair the unit due to high voltage.
Details the indicators and their meanings on the remote controller's display.
Identifies the buttons and their functions in the remote controller's operation section.
Allows selection of the desired air volume mode for the air conditioner.
Used to set up the timer function for the air conditioner operation.
Used for check operation; not for normal operation.
Used when a fan is connected; indicates connection status.
Resets the filter indicator display.
Controls unit functions and automatic louver movement.
Indicates the operational status of the air conditioner.
Starts and stops the air conditioner operation.
Allows selection of the desired operation mode.
Adjusts the room temperature by setting the desired temperature.
Steps for initial use and operational requirements, including power and remote controller usage.
Procedure for starting the air conditioner using the ON/OFF button and selecting modes.
Procedure for stopping the air conditioner using the ON/OFF button.
Instructions for starting the air conditioner in AUTO mode and setting temperature.
Important notes regarding operation, including delays and mode changes.
Procedure for stopping the air conditioner operation.
How to set the up/down wind direction for heating and cooling/dry modes.
Procedure to initiate automatic up/down wind direction swinging.
How to stop the automatic swinging of the louvers.
Explains the three types of timer operations: OFF, Repeat OFF, and ON timers.
Steps to set the timer, including selecting the type and time.
Procedure to cancel the timer operation using the CL button.
Tips for maintaining a comfortable room temperature efficiently.
Advice on adjusting airflow for even circulation of room air.
Instructions and cautions for cleaning the remote controller.
Steps to prepare the unit if not used for over one month.
Pre-operation checks including air filters, inlets, and power supply.
Details the 3-minute protection function and power failure response.
Explains preheating, warm air control, and defrosting operations.
Advises on issues related to snow and freezing on the outdoor unit and drain hose.
Specifies the recommended temperature and humidity conditions for operation.
Lists places where the air conditioner should not be installed.
Advice on installing the unit to minimize noise and vibration.
Lists conditions that require immediate contact with the dealer.
Checks for power supply issues when the unit is inoperative.
Checks for issues affecting cooling or heating performance.
Addresses strange noises and odors from the unit.
Details on frosting, defrosting, and airflow changes during heating.
Explains changes in airflow and the generation of white mist.