To Next PageTo Next PageWhy does my Toshiba RAV-SM562KRT-E flash alternatively?
If your Toshiba Air Conditioner flashes alternatively, it indicates that a protective device in either the outdoor or indoor unit is active. You should check both the outdoor and indoor units to determine which protective device is causing the issue.
Why is my Toshiba Air Conditioner flashing alternatively?
If your Toshiba Air Conditioner is flashing alternatively, it indicates that a protective device in either the outdoor or indoor unit has been activated. Check both the outdoor and indoor units to identify the cause.
General| Brand | Toshiba |
|---|---|
| Model | RAV-SM562KRT-E |
| Category | Air Conditioner |
| Language | English |
Explains the adoption of new refrigerant HFC (R410A) for environmental protection.
Covers DANGER, WARNING, and CAUTION statements for installation, operation, and repair.
Specific safety guidelines for installation and operating the air conditioner.
Lists and labels the various parts of the indoor unit.
Explains the functions of indicators and controls on the indoor unit.
Details the functions of each button on the wireless remote controller.
Describes the meaning of various symbols and indicators on the remote controller display.
Guides on loading remote controller batteries and initial setup procedures.
Instructions on how to set the clock on the remote controller.
Steps for preparing and installing the air filters for the unit.
Explains limitations and procedures for operating units in twin or group configurations.
Advice on handling the controller, signal reception, and placement for optimal use.
How the unit automatically selects cooling, heating, or fan based on room temperature.
Details on selecting mode A for automatic temperature-based operation.
Instructions for operating the unit in cooling, heating, or fan-only settings.
How to use the dehumidification (Dry) mode for optimal performance.
Explains the Hi POWER mode for rapid cooling or heating.
Guides on setting the ON and OFF timers for automated operation.
How to set both ON and OFF timers simultaneously for convenience.
Instructions for memorizing and recalling frequently used operation settings.
How to adjust the vertical flap for desired air direction.
Instructions for manually adjusting the horizontal air flow louvers.
Explains the various indicators and displays on the wired remote controller.
Details on selecting operation modes, fan speed, and temperature via wired control.
Explains the remote controller's ability to sense room temperature.
Steps for initial setup and correct operation of the air conditioner.
How the unit automatically selects modes based on temperature when in 'A' mode.
Procedures for setting the vertical flap direction and swing function.
How to select individual indoor units for directional control in multi-unit systems.
Explains different timer types (ON, OFF, Repeat OFF) and how to set them.
Instructions for enabling and disabling the automatic restart function after power loss.
Describes how modes like ECO, QUIET, DRY, and Hi POWER function.
Advice on maintaining room temperature and using features for economical operation.
How to operate the unit temporarily without the remote controller.
Procedures for cleaning the indoor unit and remote controller safely.
Step-by-step guide for cleaning the air filters regularly.
Instructions for cleaning and replacing Sasa-Zeolite plus filters.
Guidelines for cleaning and replacing Bio-enzyme & Gingko filters.
Details on operating temperature ranges, protection features, and power failure.
Lists common issues and checks to perform before requesting service.
Explains common occurrences like dewing, noises, and mist generation that are not malfunctions.
