16
SETTING UP YOUR TV
English
a Press MENU and use C or c to select the SETUP
menu. Press
b to highlight ATV Manual Tuning and
press OK to select.
b Use B or b to highlight the desired position. We
suggest Pos. 0 for a media recorder.
c Press OK to select. If the channel chosen for the media
recorder is set to skip, Skip should be removed before
storing.
d Press c to select System and use B or b to change if
required.
e Then press c to select Search.
f Press B or b to begin the search. The search symbol
will flash.
g Each signal will show on the television. If it is not your
media recorder, press
B or b again to restart the
search.
h When your media recorder signal is found, press c to
move along to Station. Use
B, b, C and c to put in
the required characters, e.g. VCR.
i Press OK to save.
j Repeat for each position you want to tune, or press
RETURN to return to the list of channels and select
the next number to tune.
k Press EXIT when you have finished.
Different Channel numbers may be displayed.
This television has direct channel entry if the
channel numbers are known.
Select the ATV Manual Tuning screen in Step 3.
Enter the Position number, the System, then C for
standard (terrestrial) channels or S for cable
channels and the Channel number. Press OK to
save.
To Next Page
Loading...
