Charging status indicator for the case
Type-C USB charging socket
Charging port
Touch Sensor
Earbud status indicator
Instruction Manual
Model : RZE-BT1050E
Part Name
Getting Started
The earbuds and the charging case have built-in lithium-ion polymer batteries. Charge them fully
beforehand.
Charging the Earbuds
1. Place each earbud in the charging case in the right position and close the case. The charging
status indicator is turn on, and the earbud status indicator is turn on in red. Both
indicator and will turn off after earbuds fully charged.
Charging the Charging Case
1. Insert the supplied USB cable into the Type-C USB charging socket on the charging case.
2. Connect the USB cable to a USB port of your computer or a mobile USB charger.
The charging status indicator flash during the charging
Charging case
(Front view)
1
Charging case
(Rear view)
2
Charging case
(Compartment)
3 Left 3 Right
Earbuds
(Left and Right)
4 5 5 4
To Next Page
Need help?
General
