RZE-BT700E Manual
How to pair for stereo mode：
1.When the L&R units are used independently：
They can be used as 2 complete and independent Bluetooth earbuds.
Long press MFB for 3 seconds to turn on the earbud(blue indicator light quick
flash 3 times)
After turning on, double-click MFB enter pairing mode(red&blue indicator lights
flash)
Turn on your mobile phone’s Bluetooth function and search for the name”T04” to
connect it.( indicator light off once connected)
Long press MFB for 3 seconds until red indicator light quick flash 3 times to
power off the earbud
After the first use, just long press MFB until the blue indicator light flash, and the
earbud will re-connect with the mobile phone automatically.
2.When the L&R units are used together：
Long press A&B earbud’s MFB at same time for 3 seconds until blue indicator
flash
A&B earbuds will connect automatically firstly, and then enter the pairing state.
Blue lights off once A&B earbuds paired successfully
Turn on your mobile phone’s Bluetooth and search for the name”T04” to connect
it.( indicator lights off once connected)
Long press A or B MFB for 3 seconds until red indicator light quick flash 3 times
to power off 2 earbuds
Note: If A&B earbuds doesn’t pair successfully and can’t listen to music, please
try steps as follow.
Place the earbuds and mobile phone within 1 meter.
Make sure 2 earbuds was turned off.
Long press 2 earbud’s MFB for 3 seconds at the same time to turn them on (blue
indicator light quick flash 3 times)
To Next Page
Need help?
General
