20
Mobile computing
RG 5.375 x 8.375 ver 2.3.4
Removing the battery from the battery cover
3 Lift the battery from the battery cover.
Inserting a charged battery
1 Turn off the computer.
See “Turn Off or Shut down command” in your electronic user’s
guide.
2 Remove the battery.
See “Removing the battery from the computer” on page 19.
3 Release the battery from the battery cover.
See “Removing the battery from the battery cover” on page 19.
4 Wipe the battery terminals of the charged battery with a clean cloth to
ensure a good connection.
5 Hold the battery so that the label is face down.
6 Fit the battery in the battery cover, ensuring the battery connectors are
exposed. Make sure the battery is secured by the battery cover latches.
7 Find the four side tabs on the battery cover and line them up with the
corresponding recessed areas along the sides of the empty battery slot.
When the tabs line up with the recessed areas, the battery cover will
slip comfortably into the battery slot.
8 Once the battery cover has been inserted, slide the battery cover until
the side of the battery release latch matches the side of the computer.
9 Slide the battery release latch toward the back of the computer. You
may need to press the cover in from the edge slightly to return the
latch to the closed position.
Inserting the battery cover
Tab
Battery cover latch
Battery cover latch
Tab
Battery release latch
To Next Page
Loading...
