7
Setting up your computer and getting started
RG 5.375 x 8.375 ver 2.3.4
Precautions
Your notebook computer is designed to provide optimum safety and ease of
use, and to withstand the rigors of travel. You should observe certain
precautions to further reduce the risk of personal injury or damage to the
computer.
CAUTION: Never apply heavy pressure to the computer or subject it to sharp impacts.
Excessive pressure or impact can damage computer components or otherwise cause
your computer to malfunction.
CAUTION: Some PC Cards become hot with prolonged use. If two cards are installed,
both can become hot even if only one is being used. Overheating of a PC Card can
result in errors or instability in its operation.
Be careful when you remove a PC Card that has been used for lengthy periods of time.
Important information on your computer’s built-in LCD sensor
Your computer has a built-in LCD (liquid crystal display) sensor located
near the left-hand corner of the palm rest. When the computer is on, the
LCD sensor detects when the display panel is closed.
Please do not place a magnetic object in the area of the left-hand corner of
the palm rest. A magnetic object placed there causes the LCD sensor to
erroneously activate.
For more information, see “Important information on your computer’s
built-in LCD sensor” in your electronic user’s guide.
Connecting to a power source
Your computer requires power to operate. Use the power cable and AC
adapter to connect the computer to a live electrical outlet, or to charge the
computer’s battery.
Built-in
LCD sensor
To Next Page
Loading...
