User's Manual
8-2
OPTIONAL DEVICES
PC cards
The computer is equipped with a PC card expansion slot that can accommodate one
5 mm Type II card. Any PC card that meets industry standards (manufactured by
TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC cards,
including PC card 16’s multifunction card and CardBus PC cards.
CardBus supports the new standard of 32-bit PC cards. The bus provides superior
performance for the greater demands of multimedia data transmission.
Inserting a PC card
The PC card connector is located on the left side of the computer.
Windows’ hot-install feature lets you install a PC card while the computer’s power
is on.
NOTE: Do not install a PC card while the computer is in standby or
hibernation mode. Some cards might not work properly.
To install a PC card, follow the steps below.
1. Insert the PC card.
2. Press gently to ensure a firm connection.
Figure 8-1 Installing the PC card
After installing the card, refer to the card’s documentation and check the configura-
tion in Windows to make sure it is appropriate for your card.
PC CARD
To Next Page
Loading...
