User's Manual
TROUBLESHOOTING
9-24
Character display In data transmission, make sure the parity bit
becomes garbled and stop bit settings correspond with those
during a of the remote computer.
communication
Check the flow control and communication
protocol.
You cannot receive Check the rings before auto answer setting in
an incoming call your communications application.
You can also use the ATS0 command. Refer to
the online help files for Appendix D, S-registers.
If problems persist, contact your dealer.
LAN
Problem Procedure
Cannot access LAN Check for a firm cable connection between the
LAN jack and the LAN HUB.
Wake-up on LAN Make sure the universal AC adaptor is con-
nected. The does not work Wake-up on LAN
function consumes power even when the system
is off.
If problems persist, consult your LAN
administrator.
To Next Page
Loading...
