152
Toshiba Utilities
TOSHIBA SD™ Memory Boot Utility
TOSHIBA SD
™
Memory Boot Utility
The TOSHIBA SD
™
Memory Boot Utility allows you to create an
SD card you can use to boot up your computer.
This utility also allows you to easily format SD Memory Cards.
Refer to the online Help documentation within the application for
any additional help.
To make a bootable SD card:
1 Attach a USB floppy drive to your computer and insert a
bootable floppy disk.
2 Insert the SD card.
Be sure to back up your data to external media before performing this
procedure as data on the drive may be lost.
3 Click Start, All Programs, Tos h iba, Utilities, and then SD
Memory Card.
The TOSHIBA SD Memory Boot Utility screen appears.
(Sample Image) TOSHIBA SD Memory Boot Utility screen
4 Select the drive where the SD card is located.
5 Select Read from a floppy disk.
6 Click Start.
To create a bootable SD card with the Read from an image file
option, you need a third-party application.
Downloaded from LpManual.com Manuals
To Next Page
Loading...
