User’s Manual E-1
A
PPENDIX
E
Appendix E
AC Power Cord and
Connectors
The power cord’s AC input plug must be compatible with the various interna-
tional AC power outlets and the cord must meet the standards for the country/
region in which it is used. All cords must meet the following specifications:
Length: Minimum 1.7 meters
Wire size: Minimum 0.75 mm
2
Current rating: Minimum 2.5 amperes
Voltage rating: 125 or 250 VAC
(depending on country/region’s power standards)
Certification agencies
U.S. and Canada:UL listed and CSA certified
No. 18 AWG, Type SVT or SPT-2 two conductor
Europe:
Austria: OVE Italy: IMQ
Belgium: CEBEC The Netherlands: KEMA
Denmark: DEMKO Norway: NEMKO
Finland: FIMKO Sweden: SEMKO
France: UTE Switzerland: SEV
Germany: VDE United Kingdom: BSI
Australia: AS
In Europe, two conductors power cord must be VDE type, H05VVH2-F or
H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F.
For the United States and Canada, two pin plug configuration must be a 2-15P
(250V) or 1-15P (125V) and three pin plug configuration must be 6-15P (250V)
or 5-15P (125V) as designated in the U.S. National Electrical code handbook and
the Canadian Electrical Code Part II.
To Next Page
Loading...
