User’s Manual 3-10
Getting Started
b. Press the F9 key to set to default settings, and select Yes.
c. Press the F10 key to save the changes, and select Yes.
d. When the TOSHIBA Leading Innovation>>> prompt
appears,
press the F12 key to display the Boot menu. Go to the (3.)step.
3. Use the up or down cursor key to select CD/DVD in the display menu.
For details, refer to the Boot Priority section in Chapter 7, HW Setup
and Passwords.
4. A menu appears. Follow the on-screen instructions.
When drivers Utilities are installed, you can setup the respective drivers
and utilities from the following folder. C: \ TOSAPINS\***
When removing pre-installed drivers/utilities or when installing, you can
setup the respective drivers/utilities from the following folder.
C:\TOSAPINS\***
To Next Page
Loading...
