37
Your computer’s TFT display
5.375 x 8.375 ver 3.1
3 Carefully remove the module from the slot.
Static electricity can damage the memory module. Before you handle the
module, touch a grounded metal surface to discharge any static electricity
you may have built up.
To avoid damaging the memory module, be careful not to touch its pin
connector (on the side you insert into the computer).
Avoid touching the connectors on the memory module or on the computer.
Grease or dust on the connectors may cause memory access problems.
Removing the memory module
4 Complete the procedure by following steps 8 through 13 in “Installing
additional memory (optional)” on page 30.
Your computer’s TFT display
Small bright dots may appear on your TFT display when you turn on your
computer. Your display contains an extremely large number of thin-film
transistors (TFT) and is manufactured using high-precision technology.
Any small bright dots that may appear on your display are an intrinsic
characteristic of the TFT manufacturing technology.
To Next Page
Loading...
