47
Mobile computing
5.375 x 8.375 ver 3.1
Changing the main battery
When your battery power is running low, you have two options: connect the
computer to an AC power source or install a charged battery.
When handling a battery, be careful not to drop it or short-circuit its
terminals. Also, do not drop, hit or otherwise impact the battery. Do not
scratch or break the casing and do not twist or bend the battery.
Do not remove the battery while the computer is in Standby mode. Data in
memory will be lost.
If your battery discharges fully, your information will be lost. Be sure to save
your work often.
Removing the battery from the computer
1 Save your work.
2 Turn off the computer via the Start menu or place it in Hibernation
mode according to the instructions in “Using Hibernation” in your
electronic user’s guide.
3 Remove all cables connected to the computer.
4 Close the display panel and turn the computer upside down with the
front side of the computer facing you.
5 Move the battery release lock toward you (and the front of the
computer) to move the battery release latch.
Releasing the battery lock
To Next Page
Loading...
