48
Mobile computing
5.375 x 8.375 ver 3.1
6 Slide the battery release latch to the right.
Releasing the battery
7 While still holding the release latch in the open position lift the battery
pack out of the computer.
Removing the battery
If the battery is leaking or its case is cracked, put on protective gloves to
handle it, and discard it immediately following the advice in “Disposing of
used batteries safely” on page 50.
Inserting the battery in the computer
Assuming you just removed the battery pack (see “Removing the battery
from the computer” on page 47):
1 Place the battery pack in the battery compartment.
2 Ensure the battery release latch clicks into place.
3 Move the battery release lock toward the back of the computer to lock
the release latch.
To Next Page
Loading...
