B-10 User’s Manual
Display Controller and Modes
Display Settings
1. 1.You cannot move from the [Settings] tab of [Display Properties] to
the multi-monitor when you are using the display of the computer and
an external CRT display at the same time.
■ The [Settings] tab is displayed in the following steps;
■ Open [Control Panel], click [Appearance and Themes]
■ Click [display]
■ Select [Settings] tab
FigureB-1 Display Properties
■ The way to move to multi-monitor
■ Press [Ctrl] + [Alt] + [F12] keys to make
[Intel(R) 82852/82855 GM/GME Graphics Controller Prope...]
displayed. (See FigureB-2)
■ Click in the left of [Devices] tab (See FigureB-2), then select
[Extended Desktop].
■ Check that the Primary Device is fixed into Note Book (the display of
the computer) and the Secondary Device is being fixed into Monitor
(CRT display).
To Next Page
Loading...
