User’s Manual 2-27
The Grand Tour
2. Insert the batteries in place.
Be sure to place the batteries with their polarities (+ and -) in the correct
position.
Figure 2-14 Inserting the batteries
3. Close the battery cover.
Close the cover securely until it clicks.
Figure 2-15 Closing the battery cover
Replacing the batteries
When the batteries in the Remote Controller reach the end of their life, the
Remote Controller may not operate correctly or work only within a short
distance from your computer. In this instance, you should purchase new
batteries and replace the discharged ones.
1. Open the battery cover on the back of the Remote Controller.
2. Replace the batteries.
Be sure to place the batteries with their polarities (+ and -) in the correct
position.
Figure 2-16 Removing the batteries
3. Close the battery cover until it clicks.
To Next Page
Loading...
