User’s Manual 3-20
Hardware, Utilities and Options
3. Insert the ExpressCard into the ExpressCard slot on the side of the
computer.
4. Press the ExpressCard gently to ensure a firm connection is made.
Figure 3-1 Inserting the ExpressCard
5. After inserting the ExpressCard you should refer to its documentation
and also check the configuration in Windows in order to ensure that it is
correct.
Removing an ExpressCard
To remove an ExpressCard, follow the steps as detailed below.
1. Open the Safely Remove Hardware and Eject Media icon on the
Windows Taskbar.
2. Point to ExpressCard and click the left Touch Pad control button.
3. Press the ExpressCard in order to eject the ExpressCard partially out of
the computer.
4. Grasp the ExpressCard and remove it.
Figure 3-2 Removing the ExpressCard
5. Insert the Dummy card into the ExpressCard slot.
1. ExpressCard slot
2. ExpressCard
1. ExpressCard
1
2
1
When you do not use an ExpressCard, please be sure to insert a Dummy
card.
To Next Page
Loading...
