User’s Manual 6-2
Power and Power-Up Modes
Table 6-1 Power conditions continued
Monitoring of power condition
As shown in the below table, the DC IN/Battery and Power indicators on
the system indicator panel alert you to the computer’s operating capability
and battery charge status.
DC IN/Battery indicator
Check the DC IN/Battery indicator to determine the status of the battery
pack. The following indicator lights indicate the battery status:
Power on
Power off
(no operation)
AC
adaptor
not
connected
Remaining
battery capacity
is above low
battery trigger
point
• Operates
• DC IN/Battery LED:
amber
Remaining
battery
capacityis below
low battery
trigger point
• Operates
• DC IN/Battery LED:
blink amber
Remaining
battery capacity
is exhausted
Computer shuts down
No battery
installed
• No operation
• DC IN/Battery LED:
off
Blinking amber The battery charge is low, the AC adaptor must be
connected in order to recharge the battery.
Or, Indicates a problem with the power supply. You
should initially try plugging the AC adaptor into
another power outlet - if it still does not operate
properly, you should contact your reseller or dealer.
Amber Indicates the AC adaptor is connected and the
battery is charging.
To Next Page
Loading...
