4 Replacement Procedures 4.4 Keyboard
4.4 Keyboard
Removing Keyboard
Remove the Keyboard according to the following procedures and Figure 4-9.
1. Release the following 12 latches on the keyboard cover, in that order:
- One left latch
- Five bottom latches
- Six front latches
2. Remove the keyboard cover.
3. Remove four M 2.5x2.6 black bind screws.
4. Release the keyboard lock latch.
5. Disconnect the keyboard cable from CN11 on the system board.
6. Remove the keyboard.
M2 5x2 6 black flat head screw..
Keyboard latch
Keyboard
Keyboard cover
Latch
CN11
Figure 4-9 Removing the keyboard
4-22 Satellite L350/ Satellite Pro L350/ EQUIUM L350/ SATEGO L350 Maintenance Manual
To Next Page
Loading...
