User’s Manual 9-10
Troubleshooting
DVD Super Multi drive
For further information, please refer to Chapter 4, Operating Basics.
Problem Procedure
You cannot access a
CD/DVD in the drive
Make sure the drive's disc tray is securely closed -
press it gently into the computer until it clicks into
place.
Open the drive's disc tray and ensure the CD or
DVD is properly seated - it should lie flat with the
label facing upwards.
A foreign object in the drive's disc slot could
block laser light from reading the CD or DVD -
remove any foreign objects or obstructions that
may be present.
Check whether the CD or DVD is dirty - if it is,
wipe it with a clean cloth lightly dipped in water or
a neutral cleaner. Please refer to the Media care
section in Chapter 4 for further details on
cleaning the media.
To Next Page
Loading...
