User’s Manual 4-8
Operating Basics
Loading discs
To load CDs/DVDs/BDs, follow the steps as detailed below:
1. When the computer’s power is on, press the eject button to open
the disc tray slightly.
2. Grasp the disc tray gently and pull until it is fully opened.
Figure 4-4 Pressing the eject button and pulling the disc tray open
3. Lay the CD/DVD/BD, label side up, in the disc tray.
Figure 4-5 Inserting a CD/DVD/BD
1. Disc tray 2. Eject button
1. Laser lens
1
2
1
To Next Page
Loading...
