User’s Manual 7-5
HW Setup
SATA
eSATA
This feature allows you to set conditions for SATA.
SATA Interface setting
This feature allows you to set SATA interface setting.
USB
Legacy USB Support
Use this option to enable or disable USB Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse
and keyboard by setting the Legacy USB Support item to enabled.
Enabled Enables Built-in LAN functions (Default).
Disabled Disables Built-in LAN functions.
Enabled Enables the eSATA port. (Default)
Disabled Disables the eSATA port in order to save power.
Performance Let HDD/SSD work with maximum performance.
(Default)
Battery life Let HDD/SSD work with battery life mode. If this
setting is selected, this caused performance
down.
Enabled Enables the USB Legacy Emulation (Default).
Disabled Disables the USB Legacy Emulation.
To Next Page
Loading...
