160
Toshiba Utilities
Using a supervisor password
5.375 x 8.375 ver 2.3
Disabling a user password
To cancel the power-on password function:
1 Click Start, then click All Programs.
2 Point to TOSHIBA Assist, then click the resulting
TOSHIBA Assist selection.
The TOSHIBA Assist window appears.
3 On the left side, select Secure.
4 Select the User Password icon.
5 Select Not Registered.
6 Type the correct password.
7 Click OK.
Using a supervisor password
A supervisor password prevents other users from changing
hardware configuration options.
Setting a supervisor password
If you choose to set a supervisor or user password, Toshiba
strongly recommends that you save your password in a
location where you can later access it should you not
remember it.
Toshiba is not responsible for any losses that may occur to
you, your organization or others as a result of the inability to
access the computer.
To register a password for the power-on password functions:
1 Click Start, then click All Programs.
To Next Page
Loading...
