74
Getting Started
Connecting external speakers or headphones
5.375 x 8.375 ver 2.3
Connecting external speakers or headphones
To attach an external stereo output device:
1 Locate the headphone jack on the front of the computer.
2 Using any necessary adapters, plug the cable from the
external audio device into the headphone jack. The
headphone jack requires a 3.5-mm, 16-ohm stereo jack.
When the headphone is inserted, the internal speakers are
automatically disabled.
Connecting a microphone
Before playing an audio CD, turn the volume down. Playing
the compact disc at maximum volume could damage your
ears. To turn the volume down, use the Volume Control switch
or access the Volume Control program (click Start, All
Programs, Accessories, Entertainment, Volume Control).
To record high-quality sounds, you can attach a microphone:
1 Locate the microphone jack on the front of the computer.
2 Plug the microphone cord into the jack.
3 Turn on the microphone.
For more information, see “Recording sounds” on page 137.
To Next Page
Loading...
