71
Getting Started
Setting up your printer
5.375 x 8.375 ver 2.3
The Add Printer Wizard starts.
Sample Add Printer Wizard
4 Click Next.
The Add Printer Wizard asks you to select your printer.
TECHNICAL NOTE: If your printer is Plug and Play, the
operating system recognizes it automatically. You can ignore
the remainder of this section. See your printer manual.
5 If the printer you are setting up:
❖ Is not connected to a network, select Local printer
attached to this computer.
If you select Local printer, check “Automatically detect and
install my Plug and Play printer.”
❖ Is connected to a network, select Network printer, or a
printer attached to another computer.
6 Click Next.
The Add Printer Wizard prompts you to select your printer.
To Next Page
Loading...
