Replacement Procedures
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
4
Installing the system board
The following describes the procedure for installing the system board.
1. Secure the system board with the following screws.
M2.5×6.5 screw x3
2. Secure the fan with the following screws.
M2.5×6.5 screw x2
3. Connect the speaker cable, LCD CABLE, ANTENNA, CRT cable, USB cable,
FM CABLE, MDC CABLE, and TV-F ANTENNA to the connector on the system
board.
4. Connect the power cable to the connector on the system board
To Next Page
Loading...
