User’s Manual 3-27
Hardware, Utilities and Options
Figure 3-6 Removing the memory module
9. Seat the memory module cover in place and secure it with the screw.
10. Install the battery pack - refer to Replacing the battery pack section in
Chapter 6, Power and Power-Up Modes, if required.
11. Turn your computer over.
External monitor
An external analog monitor can be connected to the External RGB monitor
port on the computer. To connect a monitor, follow the steps as detailed
below:
1. Latches
1
Take care to ensure that the memory module cover is firmly closed.
To Next Page
Loading...
