For A40-C: Align the top left or top right corner of your computer to
the B+ mark on the Port Replicator.
2. Press down on the back of the computer until it clicks into place. The
computer connector on the port replicator engages the computer’s
docking port.
When the computer is connected, the Docked light on the Port
Replicator glows green while the computer is powered on.
Figure 4-22 Aligning your computer with the Port Replicator (A30-C)
Figure 4-23 Aligning your computer with the Port Replicator (A40-C)
1. Docking port (computer)
Product appearance depends on the model you purchased.
User's Manual
4-43
To Next Page
Loading...
