114
Utilities
System Settings
System Settings
System Settings is the TOSHIBA configuration management
tool available through the Windows
®
operating system. To
access it:
1 To access System Settings from the Start screen begin
typing
System Settings.
2 Click or touch
System Settings.
The System Settings screen appears.
(Sample Image) System Settings screen – General tab
options
The System Settings screen may have the following tabs:
❖
Boot Options—Allows you to change the sequence in
which your computer searches the drives for the
operating system
❖
Boot Priority—Allows you to configure boot priority
settings.
❖
Panel open/Power on—Allows you to turn on the
computer when opening the display panel while the
computer is turned off.
❖
Display—Allows you to change various default settings
for the built-in display
When the computer restarts, it remembers the last
configuration. If data does not appear on the display you
are using after starting in Sleep mode, press the
( ) + P
keys to toggle the display. For more information, see
“Directing the display output when you turn on the
computer” on page 62.
NOTE
To Next Page
Loading...
