45
Getting Started
To pla ce your computer in Sleep mode
To place your computer in Sleep mode
1 Press the Windows
®
( ) key to display the Start
screen.
If you power down using the Sleep command and the
battery discharges fully, your unsaved information will be
lost. Be sure to save your work first.
2 Click or touch the
Power ( ) icon at the upper-right
corner of the screen.
(Sample Image) Sleep
3 Highlight Sleep, and then click or touch the Sleep
option.
Sleep mode saves the current state of the computer to
memory so that, when you restart the computer, you can
continue working from where you left off.
Adding optional external devices
Before adding external devices, Toshiba recommends
setting up your software. See “Setting up your software”
on page 42.
After starting your computer for the first time you may want
to:
❖ Connect external devices (see “Connecting an external
device” on page 60)
❖ Connect an external monitor (see “Using external
display devices” on page 61)
To Next Page
Loading...
