Replacement Procedures
Satellite U400/Satellite Pro U400/PORTEGE M800
Maintenance Manual 4-15
Installing HDD
The following procedures describe the way of installing a HDD
Install a HDD to the HDD bracket and secure it with the following screws.
• M3.0×0.5+3.5I B FLAT BIND screw x4
NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for
four screws securing the HDD holder.
1. Insert the HDD assembly into the HDD slot and connect it carefully to the system
board.
2. Secure the HDD assembly with the following screw.
• M2.0×3.0B FLAT BIND screw x2
To Next Page
Loading...
