34
Advanced playback
Press T several times.
You may have to press further
depending on the disc. Press the
button repeatedly until the clock icon
is highlighted.
Press the number buttons to enter the
time.
Press PLAY or ENTER.
Playback starts
from the desired
location.
Accessing a Specific Location Directly
You can access a specific location by entering its corresponding time (hours,
minutes, seconds).
Entering the time of the desired location
2
1
Notes
• Some discs may not respond to this process.
• Some scenes may not be located precisely as you specified.
• This method for accessing specific locations is available
only within the current title of the DVD video disc or within
the current track of the VIDEO CD/audio CD.
35
Playing Repeatedly
You can play a specific title, chapter, track, or segment repeatedly.
(Title repeat, chapter/track repeat, A-B repeat)
Repeating a title, chapter, or track
Press REPEAT.
Each time you press the REPEAT
button, the repeat mode changes as
follows.
1
To resume normal playback
Press CLEAR.
Note
Some discs may not permit repeat operation.
Repeating a specific segment
Press A-B RPT at the beginning of the
segment (point A) you want to play
repeatedly.
Press A-B RPT again at the end of the
segment (point B).
The DVD video player automatically
returns to point A and starts repeat
playback of the selected segment
(A-B).
2
1
To resume normal playback
Press CLEAR.
Notes
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that
includes multiple camera angles
.
• You can specify a segment only within the current title or
track (VIDEO CD).
• There may be a slight difference between point A and the
location where playback actually resumes depending on the
disc.
Press PLAY.
The DVD video player starts repeat
playback.
Press the PLAY button within about
5 seconds after you press the
REPEAT button.
2
To Next Page
Loading...
