Toshiba SD-2550A - Subtitle & Language Selection

1-21
42
Advanced playback
Selecting Subtitles
You can display subtitles on the TV screen and select a subtitle language from those included on the DVD video disc.
Selecting a subtitle language Press SUBTITLE during playback.
The current subtitle setting is displayed.
The abbreviation of the language appears instead of the language name. Refer to the list of languages and their abbreviations.
56
Press SUBTITLE or
/
while the subtitle
setting is displayed on the TV screen.
Each time you press the SUBTITLE button, the subtitle languages included on the DVD video disc change. To turn off the subtitle setting display, press the CLEAR or ENTER button.
To turn subtitles on or off
1 Press SUBTITLE during playback. 2 Press
/ while the subtitle setting is displayed on
the TV screen, to select “On” or “Off.”
Notes • When you turn on the DVD video player or replace a disc, the player returns to the initial default setting
52
.
When you select a subtitle language which is not included on the disc, the DVD video player plays a prior language programmed on the disc.
• During some scenes, the subtitles may not appear immediately after you change the subtitle language.
1 2
Notes • Some DVD video discs are set to display subtitles
automatically, and you cannot turn them off even if you set the subtitle function to off.
• During some scenes, the subtitles may not appear
immediately after you select “On.”
• Some DVD video discs will allow you to make subtitle
selections and turn subtitles on or off only via the disc menu.
SUBTITLE
/ / /
CLEAR
ENTER
DVD
SUBTITLE
SUBTITLE
SUBTITLE
ENTER
ENTER
Bonsoir!Good evening! `Buenas tardes!
Off
JP
N
1
FRE 1
SP
A
1
e.g.
43
Press AUDIO or
/ while the audio
setting is displayed on the TV screen.
Each time you press the AUDIO button, the audio settings included on the DVD video disc change. If you press the
/ buttons, you
can select output sound format.
50
To turn off the audio setting display, press the CLEAR or ENTER button.
Selecting a Language
You can select a preferred language and sound recording system from those included on the DVD video disc.
Selecting a playback audio setting
Press AUDIO during playback.
The current audio setting is displayed.
The abbreviation of the language appears instead of the language name. Refer to the list of languages and their abbreviations.
56
Output sound conversion table (sampling frequency/quantization bit)
12
CLEAR
2 1, 2
ENTER
DVD
VCD
AUDIO
AUDIO
ENTER
Good morning!
¡Buenos días!
Bonjour!
BITSTREAM/PCM
jack
ANALOG AUDIO
OUT jacks
BITSTREAM/PCM
jack
ANALOG AUDIO
OUT jacks
BITSTREAM/PCM
jack
ANALOG AUDIO
OUT jacks
“Bitstream” “Analog 2ch”
“PCM”
Audio selection from the menu
and output jacks on the rear panel
Recording system
Discs
DVD video
discs
Audio CDs
VIDEO CDs
Linear PCM
Dolby Digital
DTS
MPEG1, MPEG2
Linear PCM
44.1 kHz/16 bit
48 kHz/20 bit
48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit 48 kHz/24 bit 96 kHz/16 bit 96 kHz/20 bit 96 kHz/24 bit
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
48 kHz/16 bit 48 kHz/20 bit 48 kHz/24 bit 48 kHz/16 bit 48 kHz/20 bit 48 kHz/24 bit
Bitstream Bitstream
Bitstream Bitstream
44.1 kHz/16 bit
44.1 kHz/16 bit
Bitstream
Bitstream 48 kHz/16 bit 48 kHz/20 bit
48 kHz/16 bit 48 kHz/20 bit 48 kHz/24 bit 96 kHz/16 bit 96 kHz/20 bit 96 kHz/24 bit
48 kHz/16 bit 48 kHz/20 bit 48 kHz/24 bit 48 kHz/16 bit 48 kHz/20 bit 48 kHz/24 bit
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
44.1 kHz/16 bit44.1 kHz/16 bit
48 kHz/20 bit
44.1 kHz/16 bit44.1 kHz/16 bit
48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit
MPEG1
44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit
44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
5048
: 3D sound enhancement can function.
DTS
(Noise)
Bitstream
(Noise)Bitstream
(Noise)
Bitstream
48 kHz/16 bit
48 kHz/16 bit
Selecting sound channels of VIDEO CDs
You can switch left and right channels by pressing the AUDIO button repeatedly during playback.
Notes • When you turn on the DVD video player or replace a disc,
player returns to the initial default setting
52
.
If you select a sound track which is not included on the disc, the DVD video player plays a prior sound track programmed on the disc.
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button and choose the appropriate language from the selections on the disc menu.
ENG2
D 2CH
ENG
1
PCM
2CH
e.g.
AUDIO