Toshiba SD 2800 - IMPORTANT SAFETY INSTRUCTIONS; General Safety Instructions

2-4. Inductor Indication
Unit None ........... H
m ........... mH
m ........... mH
Tolerance None ........... ±5%
B ........... ±0.1%
C ........... ±0.25%
D ........... ±0.5%
F ........... ±1%
G ........... ±2%
K ........... ±10%
M ........... ±20%
2-5. Waveform and Voltage Measurement
• The waveforms for CD/DVD and RF shown in the
circuit diagrams are obtained when a test disc is
played back.
• All voltage values except the waveforms are expressed
in DC and measured by a digital voltmeter.
2-6. Others
• The parts indicated with "NC" or "KETU" etc. are not
used in the circuits of this model.
Eg. 4
Eg. 5
Fig. 3-2-4
Fig. 3-2-5
Type name
10 m
Type Tolerance