1-15
PREPARATION
Before Operation (Cont’d)
Initial Settings
You can install your own Personal Preferences.
Initial Settings General Operation
11
Press SETUP.
The setup menu appears.
22
Press
33
33
/
44
44
to select the desired item.
The screen will display the current setting for the
selected item, as well as alternate setting(s).
33
While the desired item is displayed, press
22
22
,
then
33
33
/
44
44
to select the desired setting.
44
Press ENTER to confirm your selection.
Some items require additional steps.
55
Press SETUP, RETURN or PLAY to exit the
setup menu.
If you press SETUP or RETURN to exit the setup
menu, DVD Player will be in stop mode. So, you
must press PLAY to play back.
Language
Disc Language
Select a language for the disc’s Menu, Audio and Subtitle.
Original :
The original language included on the disc is selected.
Other : To select another language, enter the 4-digit number
corresponding to the language code list on page 26. If you
enter the wrong language code, press CLEAR.
Menu Language
Select a language for the setup menu. This is the menu
you see when you press SETUP.
Picture
TV Aspect
4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both side of the original picture may be cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.
DVD
DVD
To Next Page
Loading...
