Toshiba SD-V395 - Page 34

DISASSEMBLY INSTRUCTIONS
B1-2
1
VCR Deck
2
FE Head
2
AC Head Cover
2
1-6: VCR PCB (Refer to Fig. 1-6)
1.
2.
3.
4.
Remove the screw 1.
Remove the 2 screws 2.
Remove the screw 3.
Remove the VCR PCB in the direction of arrow.
1-5: VCR DECK (Refer to Fig. 1-5)
1.
2.
3.
4.
5.
6.
Move the Cassette Holder Ass’y to the back side.
Remove the screw 1.
Remove the FE Head.
Remove the 3 screws 2.
Disconnect the following connectors:
(CP101, CP102, and CP3001).
Remove the AC Head Cover and VCR Deck in the
direction of arrow.
1-4: DVD PCB (Refer to Fig. 1-4)
1.
2.
3.
4.
Remove the 3 screws 1.
Remove the 4 screws 2.
Disconnect the following connectors:
(CP4002 and CP8102).
Remove the DVD PCB in the direction of arrow.
Fig. 1-4
Do not remove the cable at the FE Head section. The FE
Head may be damaged if you remove the cable by force.
NOTE
Fig. 1-5
1
1
DVD PCB
2
2
2
2
1
Fig. 1-6
3
VCR PCB
1
2
2