11
EN
DISMOUNT AND DISCONNECT
THE DRIVE
It is strongly recommended not to unplug the
drive by just unplugging the cable connection as it
may be that data is written to the drive at that
time.
Such data will be lost and the drive may be
damaged physically!
Please follow the steps below for a safe dismount
of the drive:
1. Click the “Safely Remove – icon”
A pop-up message box will appear listing the
external devices connected to your computer.
2. Select the TOSHIBA drive.
After a few seconds, you will get the notification
that it is now safe to remove the device.
3. Click “OK” and you can unplug the drive now.
Cleaning the drive case / enclosure
Before cleaning the drive, make sure that it’s
physically disconnected from the computer. We
suggest to use standard products for cleaning it and
to make sure that possible remaining liquid on the
surface will be wiped off.
To Next Page
Loading...
