Toshiba Stor.E Steel - Connecting the Drive to Your Computer; Connection Procedure

9
EN
CONNECTING THE DRIVE TO
YOUR COMPUTER
1. With your computer powered on and fully booted
up, plug the primary USB type A connector into a
USB port of your host system, or an active USB HUB.
For the time being, don’t connect the secondary
type A connector.
If it is needed, it will be determined after step 2.
2. Now, plug in the mini-USB connector into the
corresponding port of the drive itself.
PC
Secondary USB type
A connector (plug
into a second USB
port, if needed)
Primary USB type A
connector (plug into
your computer)
mini-USB
connector