Toshiba Surveillix XVR16-60-X - Unlocking a New Network Camera; Connecting a Network Camera

38
Unlocking a New Network Camera
1. Start the Surveillix DVR
2. Enter Setup
3. Enter Camera Setup
4. Click the Registration Button
5. Enter the Unlock Code generated by the Toshiba
Registration Site into the “new serial number” field
6. Click Add a serial number
7. Once the new serial number has been added to the list,
click OK
Connecting a Network Camera
1. Open Camera Setup. Setup > Camera Setup
2. Select the camera channel to add a Network Device to.
3. Check the Use Network Device Box.
4. If the Network Device supports PTZ check the Enable Network
Device PTZ Box.
5. Click Setup Network Device and the Network Device Properties
Window will appear.
6. Click Setup to add a Network Device.
7. Select the Manufacturer (Class) and Model of camera being added
then click Next.
8. Enter the IP Address, Port, ID, and Password of the Network Device
and click Finish.
9. Click OK when returned to the main Network Device Propertied
Window and click OK to exit the main setup window.
10. The Network Device has been added.